| |
|
| |
|
| |
BELFOR Hizmetleri |
| |
BELFOR Restoration Agents |
| |
Development of Restoration Agents
The development of BELFOR restoration agents is conducted in BELFOR's own R&D laboratories. Here new recipes are worked out. The effectiveness and material compatibility of the restoration agents are established in accordance with internationally applicable and internal BELFOR standards in the laboratory and in practice. These special restoration agents only produced by BELFOR and can be used only by licensed BELFOR partners.
|
| |
Range of Restoration Agents ;To provide ideal restoration in all industrial and private domains BELFOR can utilise a wide range of restoration agents. The most important product groups are : |
 |
Alkaline Cleaners ;Alkaline cleaners (pH 10-14) with highly active surfactants and additives are needed for the effective removal of contamination on surfaces. Soap, wetting agents and neutral cleaners are mostly inadequate for this purpose. The alkaline constituents react with the dirt crust and break it up. The higher the pH rating, the faster soot and fire condensates or oil and grease deposits are dissolved. Hydrochloric acid present after fires is neutralised immediately and further corrosion is prevented or slowed down. According to the sensitivity of the contaminated surfaces/materials, use is made of weakly to strongly alkaline cleaners. |
|
Organic cleaners ; Cleaners on a solvent base are suitable in particular for the fast removal of grease- and oil-bearing forms of contamination or (construction) dust. Further advantages: they evaporate without leaving any residues and do not have to be rinsed off. That is why they are referred to as "single-stage cleaners". |
|
Corrosion removers ; Corrosion removers based on various material-compatible acids dissolve corrosion products ("rust") on metals after fires (hydrochloric acid exposure), water damage or environmental corrosion. Depending on the cause, nature, degree and effect of the corrosion on different metals and surfaces, adapted corrosion removers must be made available. |
|
Preservative oils ; Preservative oils stop or slow down corrosion on metals by means of inhibitors and (gas-tight) protective films against acids, water and oxygen. They are used when taking initial measures and finally to protect the metal surfaces after restoration. |
| |
|
| |
|
Ana